We just want the very best for our UAV Drones. It’s hard to maintain a UAV Drone especially when you are only a newbie. Were you aware that UAV drones need tuning up once in a while to secure the flying capabilities of your drones? This page can allow you to understand how to fly a UAV Drone while in Auto-tune mode.
When you’re all setup you are able to start flying in auto-tune mode. Although it is possible to takeoff in auto-tune mode, we now suggest take off in an alternate mode, for example, FBWA or even MANUAL then switch to auto-tune once the plane has picked up tallness and velocity.
If you captivate auto-tune mode a couple of things will happen:
1. The auto-tune framework will quickly setup some default values for your move and pitch D and I increases, along with your move and pitch most intense rates
2. The auto-tune framework will screen your requested transfer and pitch rates (as controlled by your transmitter stick developments). At the stage when the requested pitch or move speed surpasses 80% of the best speed the auto-tune framework will utilize the response of the flying machine to find out pitch or move pruning qualities.
So in the transfer heading you need to charge a hard right turn with all the aileron stick, then without further ado a short time after push the aileron stay tough another approach to order a hard left turn. Note that you don’t have to sit tight for the plane to bank within the distance after each one-stick development. After something like two minutes of pole growth in one posture you can invert the pole rapidly. The plane will steer hard right, then hard left as you move the aileron stick. With each sudden reversal it will improve the tuning worth by about 5%. So you need at least 20 full stick movements to learn a reasonable pruning worth.